|
Next
Previous
Contents
1. PLIP for the impatient
This section is used to avoid reading the document when you need to install a plip connection in one minute. Skip it.
1.1 Source side
cat /proc/parport/0/hardware
insmod parport
insmod parport_pc io=0x378 irq=7 # Got those values in BIOS setup.
insmod plip
tail /var/log/messages
ifconfig plip0 192.168.0.2 pointopoint 192.168.0.1 \
netmask 255.255.255.255 up
ifconfig plip0
ping -c1 192.168.0.2
route -n
1.2 Target side
ifconfig plip1 192.168.0.1 pointopoint 192.168.0.2 \
netmask 255.255.255.255 up
route add -host 192.168.0.2 dev plip1 # if the route is not present
1.3 Final tests
ping 192.168.0.1 # from 192.168.0.2 ping 192.168.0.2 # from 192.168.0.1 Now all TCP/IP is available between the two computer via the parallel port. Have a nice trip !
Next Previous Contents Linux HOWTO full list |
|
This document, LDP HOWTO-INDEX, is copyrighted (c) 1995 - 2002 by Tim Bynum, Guylhem Aznar, Joshua Drake and Greg Ferguson. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is available at http://www.gnu.org/copyleft/fdl.html. If you have questions, please contact the LDP.
Web Design Copyright © 1999-2003. Chrisranjana Software Solutions Pvt Ltd. syndicate rss feed |