18.2. The ppp-on script

This is the first of a PAIR of scripts that actually fire up the connection.

#!/bin/sh # # Script to initiate a PPP connection. This is the first part of the # pair of scripts. This is not a secure pair of scripts as the codes # are visible with the 'ps' command. However, it is simple. # # These are the parameters. Change as needed. TELEPHONE=555-1212 # The telephone number for the connection ACCOUNT=george # The account name for logon (as in 'George Burns') PASSWORD=gracie # The password for this account (and 'Gracie Allen') LOCAL_IP=0.0.0.0 # Local IP address if known. Dynamic = 0.0.0.0 REMOTE_IP=0.0.0.0 # Remote IP address if desired. Normally 0.0.0.0 NETMASK=255.255.255.0 # The proper netmask if needed # # Export them so that they will be available to 'ppp-on-dialer' export TELEPHONE ACCOUNT PASSWORD # # This is the location of the script which dials the phone and logs # in. Please use the absolute file name as the $PATH variable is not # used on the connect option. (To do so on a 'root' account would be # a security hole so don't ask.) # DIALER_SCRIPT=/etc/ppp/ppp-on-dialer # # Initiate the connection # # exec /usr/sbin/pppd debug /dev/ttySx 38400 \ $LOCAL_IP:$REMOTE_IP \ connect $DIALER_SCRIPT

Here is the ppp-on-dialer script:-

#!/bin/sh # # This is part 2 of the ppp-on script. It will perform the connection # protocol for the desired connection. # /usr/sbin/chat -v \ TIMEOUT 3 \ ABORT '\nBUSY\r' \ ABORT '\nNO ANSWER\r' \ ABORT '\nRINGING\r\n\r\nRINGING\r' \ '' \rAT \ 'OK-+++\c-OK' ATH0 \ TIMEOUT 30 \ OK ATDT$TELEPHONE \ CONNECT '' \ ogin:--ogin: $ACCOUNT \ assword: $PASSWORD

For PPP-2.2, the ppp-off script looks like:-

#!/bin/sh ###################################################################### # # Determine the device to be terminated. # if [ "$1" = "" ]; then DEVICE=ppp0 else DEVICE=$1 fi ###################################################################### # # If the ppp0 pid file is present then the program is running. Stop it. if [ -r /var/run/$DEVICE.pid ]; then kill -INT `cat /var/run/$DEVICE.pid` # # If the kill did not work then there is no process running for this # pid. It may also mean that the lock file will be left. You may wish # to delete the lock file at the same time. if [ ! "$?" = "0" ]; then rm -f /var/run/$DEVICE.pid echo "ERROR: Removed stale pid file" exit 1 fi # # Success. Let pppd clean up its own junk. echo "PPP link to $DEVICE terminated." exit 0 fi # # The ppp process is not running for ppp0 echo "ERROR: PPP link is not active on $DEVICE" exit 1